DrawerSlideForge

drawerslideforge · for laser cutters

Drawer slides,
cut from wood.

Full-extension drawer slides you cut on your own laser. Set the travel, the fit and your machine and material, and DrawerSlideForge works out the telescoping rails, shows them in 3D, and nests every part onto sheets the size of your laser bed, ready to cut at 1:1.

free in your browser SVG cut files mm or inches
DrawerSlideForge's 3D view of an 18 inch slide, half open: three wooden rails, labeled cabinet, center and drawer, telescoping out of each other.

how it works

Set it. See it. Cut it.

It all happens on one page at drawerslideforge.com, with nothing to install and no account.

1 · set

Set the slide

Enter the travel, the longest rail your stock allows, the fit clearances and the alignment pins, then pick your machine and material. DrawerSlideForge works out how many rails it takes and how they interlock.

2 · see

See it in 3D

Slide it open and closed, explode it, turn it around, and hide rails to see inside. The build guide walks through the stack it designed.

3 · cut

Cut the sheets

Every part is nested onto sheets the size of your laser bed and offset for your kerf, X and Y per side. Download the SVG files at 1:1 mm with a parts index and the build guide.

Cut one joint first: test a tongue in its channel before you cut the full set.

A cut sheet from DrawerSlideForge: the 50 parts of a pair of 18 inch slides nested onto a 600 by 300 mm bed, with the rails, the strips between them, the stops and the pins.

works with

It stands alone, and it has company.

your kerf

Measure it with KerfMeister

DrawerSlideForge offsets every cut by your laser's kerf, separately in X and Y. KerfMeister measures it for each machine and material with one test coupon. Its X and Y per side paste straight into DrawerSlideForge's Settings, both at once.

the chest

Building a chest of drawers?

DrawerSlideForge works on its own, and it is a companion to Chest & Box.

why it's free

It costs nothing. Tips are appreciated.

DrawerSlideForge is free to use, the whole of it. There is no subscription, no paid tier and no advertising. Your library and settings stay in your own browser, and projects save as files on your computer.

If it saved you material or time, you can leave a tip. It is a thank-you for the tool, never an obligation, and it is always appreciated.

try it

Best tried, not read about.

Open it, change the travel, and watch the rails rework themselves.